Aspire PocketX Vape
The Aspire PockeX represents one of the most popular kits on the market today. Praised by vapers the world over, this compact vape is perfect for both brand new beginners and those looking to upgrade from Mouth-to-Lung to a more powerful Direct-to-Lung experience.
A simple, straightforward design featuring a single button control, the Aspire PockeX is made with ease of use in mind. Pressing the firing button five times will turn the vape on, then you just press and hold it down to vape as usual. Another five presses will switch the device off, whilst the safety design ensures that the coil will never fire for more than 10 seconds consecutively.
Using a top-fill tank with a transparent Pyrex glass window, checking your levels and making sure you don’t overfill has never been easier. The 2ml capacity on the tank of the Aspire PockeX gives you plenty of draws before you’ll need a top-up. You’ll also be able to swap out the coil without risk of spilling the E-liquid already in your tank, a simple solution to a frustrating issue.
With a wide, leak-resistant drip-tip, the Aspire PockeX ensures a reliable experience without any loss of flavour or intensity. The wider tip also makes sure you’ll have no trouble making those big clouds of vape. Alternatively, if you’re looking for a more discreet hit the single button design gives you excellent control over the size of the cloud produced.
The Aspire PockeX comes standard with a 0.6ohm coil, perfect for your first foray into sub-ohm vaping. With a 1500mAh battery to power it, this powerful coil should have no trouble lasting you all day. When it does start to run low you’ll know from the LED flashing orange as you push the firing button. The included USB cable will get the Aspire PockeX back up to full charge in no time, whilst the automatic cut-off will make sure you don’t have to worry about overcharging. If you still fancy a hit while it’s charging, the Aspire PockeX is easily capable of handling both.
If you’re looking to step up the intensity of your hit, the modular design of the Aspire PockeX means the coil can easily be swapped out for something even stronger.
All of this is packed into a vape 12cm long, shorter than most modern smartphones. With a diameter of just 2cm and a weight of under 90g, the Aspire PockeX easily fits into a pocket or handbag.
The Aspire PockeX is compatible with a wide range of E-liquids, including our own Vaping Bad and Cali ranges of CBD E-liquids. With its 0.6ohm standard coil, you’d be hard-pressed to find a more suitable device for CBD vaping.
What If My Aspire PockeX Stops Working?
A range of issues can cause a vape to stop working, though in many cases they can be easily fixed. Check out our Why Is My Vape Crackling blogpost for an outline of some of the most common issues with vapes and how to fix them.
If the problem is more serious, you may need to seek support from the manufacturer. As standard the Aspire PockeX comes with a one-year warranty from Aspire themselves. This warrant card will be included in the packaging with the device and charger.
Check out our Returns Policy for information about returning a defective vape to Orange County.
Can I Use the Aspire PockeX To Vape CBD E-liquids?
We consider the Aspire PockeX to be one of the best devices for vaping CBD E-liquids. With the strength of its standard 0.6ohm coil and the ease of access to the tank, the design is perfect to get you a pleasant, controlled dose of CBD.
The Aspire PockeX is works with a range of CBD E-liquids, including our Vaping Bad and Cali ranges. For the perfect set to break into CBD vaping at a fantastic price, check out our CBD Vape Kit
What do the colours mean?
The LED located on the side of the Aspire PockeX indicates the battery status. When the battery is above 30% the light will flash blue. When it gets to 30% or below, the light will flash orange.
How Long Will The Atomizer Last?
The models of atomizers developed and used by Aspire are some of the best around. Balancing high quality material with intelligent design, they are some of the most practical on the market today.
The atomizer on an Aspire PockeX will wear out at a different rate depending on your use. Some frequent vapers can use them up within 2 weeks, whilst others will make an atomizer last months. Aspire themselves recommend swapping out atomizers after 30 days.
As always, properly priming your vape and being careful not to over-charge it with long drags is the best way to get the most from the atomizer.
Sub-ohm and Mouth-To-Lung: What’s The Difference?
We’ve mentioned that the Aspire PockeX supports a sub-ohm coil, but what exactly does that mean for your vaping experience?
Generally speaking there are two ways of vaping: Mouth-to-Lung and Direct-to-Lung. Mouth-to-Lung vaping involves holding the vapour in your mouth before fully inhaling into your lungs, similar to how a cigarette is smoked, whereas Direct-to-Lung vaping involves inhaling the vapour straight into your lungs, like regular breathing. A Mouth-to-Lung vape uses a coil with a higher resistance value and is generally smaller than a Direct-to-Lung coil. This means the E-liquid vapourises over a longer period of time, creating a less intense cloud. Direct-to-Lung, which uses a larger coil with a resistance value below one ohm (sub-ohm), vapourises the E-liquid faster and therefore makes more a more intense vapour cloud.
The Aspire PockeX supports a Sub-ohm coil and so it’s best used for Direct-to-Lung vaping, giving you a straightforward inhalation process with a more intense cloud.
Why Would I Go Sub-Ohm?
There are a few reasons to choose to go with a sub-ohm vape over a device with a higher resistance.
Firstly, if you’re looking for that intense throat-hit from your CBD E-liquids, sub-ohm is the only way to go. The increased power running through the coil means that your cloud will be more intense than a coil operating at a higher resistance, packing more of a punch into every puff.
Still, plenty of vapers go in it for the cloud alone. We’ve all got a little bit of the aspiring smoke machine in us, so seeing those big clouds come out can be a very satisfying experience. A sub-ohm coil will use up more E-liquid with every firing, so when you hit the drag hard those clouds will come out much bigger. Many vapers, more focused on this cloud than getting a hard hit, will pair their sub-ohm vapes with a lower concentration E-liquid to get a similar intensity in a much bigger cloud.
It’s also worth noting that the motion of inhalation with Direct-to-Lung vaping is more straightforward, mimicking regular breathing rather than the breathe-hold-inhale process of smoking. For those of us who have struggled with this in the past, a sub-ohm vape can be much easier to get to grips with.
How Safe Is Sub-Ohm Vaping?
The early days of vaping is littered with stories of avid vapers tinkering with their devices to lower the coil resistance, often leading to some electrifying experiences. Thankfully this has been a lot less literal in recent years. With the development in modern coil and battery technology, as well as a wealth of safety measures and the general standardising of quality across the industry, sub-ohm vaping is now safer than ever. The Aspire PockeX uses the best of these latest innovations. The odds of a short-circuit with a sub-ohm vape are roughly the same as a short circuit on any kind of device: virtually nil.
How Suitable Is The Aspire PockeX For Sub-Ohm Vaping?
Having a suitable device for sub-ohm vaping means more than just having the capacity to support a sub-ohm coil. Tank size, airflow design, battery capacity and output all have a distinct effect on how effectively a device can be used for sub-ohm vaping.
The Aspire PockeX checks all our boxes for sub-ohm vaping, an impressive feat considering how small the device is. With a top-facing air intake and a wider drip tip it’s maximised the limited space of the device to ensure proper ventilation and cooling. Meanwhile, the 1500mAh battery perfectly fits the needs of the 0.6ohm coil, giving it enough wattage to operate effectively whilst letting the battery last you a good long while.